manualshive.com logo in svg

Xirrus Wi-Fi Array XS-3500, User Manual

Share
Download
Xirrus Wi-Fi Array XS-3500 User Manual Download Page 91

Wi-Fi Array

Installing the Wi-Fi Array

69

Power Planning 

All XN Series Array models and XS16/12/8/4 Arrays support Power over 
Gigabit Ethernet (PoGE) with an integrated splitter. AC power is also supported 
on all XN Arrays and some versions of the XS8, XS12, and XS16. 

This section discusses the AC and PoGE power options.

AC Power

The AC power option requires a direct connection between the Array and a 
dedicated AC power outlet. The power cord is provided with the unit.

Power over Gigabit Ethernet

To deliver power to the Array, you may use the optional XP1 or XP8 Power over 
Gigabit Ethernet (PoGE) modules. They provide power over Cat 5e or Cat 6 cables 
to the Array without running power cables—see 

Figure 5 on page 13

. 

Specific models of the Array are compatible with specific PoGE modules. For 
details, please see 

“Power over Gigabit Ethernet Compatibility Matrix” on 

page 414

. 

 

See Also

Coverage and Capacity Planning
Deployment Examples
Failover Planning
Network Management Planning
Security Planning

#

When using Cat 5e or Cat 6 cable, power can be provided up to a distance of 
100m.

Summary of Contents for Wi-Fi Array XS-3500




























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands