manualshive.com logo in svg

Xirrus Wi-Fi Array XS-3500, User Manual

Share
Download
Xirrus Wi-Fi Array XS-3500 User Manual Download Page 217

Wi-Fi Array

Configuring the Wi-Fi Array

195

b.

Adjust Date (month/day/year)

: If you are not using NTP, check this 

box if you want to adjust the current system date. When the box is 
checked, the date fields become active. Enter the revised date (month, 
day and year) in the corresponding fields. If you don’t want to adjust 
the current date, this box should be left unchecked (default).

5.

Using an NTP Server

 

a.

NTP Primary Server

: If you are using NTP, enter the IP address or 

domain name of the NTP server.

Figure 114. Time Settings (NTP Time Enabled)

b.

NTP Secondary Server

: Enter the IP address or domain name of an 

optional secondary NTP server to be used in case the Array is unable 
to contact the primary server.

6.

Click on the 

Apply

 button to apply the new settings to this session, or 

click 

Save

 to apply your changes and make them permanent.

See Also

Services
SNMP
System Log

Summary of Contents for Wi-Fi Array XS-3500




























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands