manualshive.com logo in svg

Xirrus Wi-Fi Array XS-3500, User Manual

Share
Download
Xirrus Wi-Fi Array XS-3500 User Manual Download Page 224

Wi-Fi Array

202

Configuring the Wi-Fi Array

11.

SNMP Read-Only Username

: Enter the read-only user name. This 

username and password do not allow configuration changes to be made 
on the Array. The default is 

xirrus-ro

.

12.

SNMP Read-Only Authentication Password

: Enter the read-only 

password for authentication (i.e., logging in). The default is 

xirrus-ro

. 

13.

SNMP Read-Only Privacy Password

: Enter the read-only password for 

privacy (i.e., a key for encryption). The default is 

xirrus-ro

. 

14.

SNMP Trap Host IP Address

: Enter the 

IP Address

 or domain name, as 

well as the 

Port

 number, of an SNMP management station that is to 

receive SNMP traps. You may specify up to four hosts that are to receive 
traps. 

15.

Send Auth Failure Traps

: Choose 

Yes

 to log authentication failure traps 

or 

No

 to disable this feature.

16.

Click on the 

Apply

 button to apply the new settings to this session, or 

click 

Save

 to apply your changes and make them permanent.

See Also

Services
System Log
Time Settings (NTP)

Summary of Contents for Wi-Fi Array XS-3500




























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands