Zynq Ult VCU TRD User Guide
36
UG1250 (v2019.1) May 29, 2019
Chapter 3:
APU Software Platform
With HDMI AUDIO design, to enable audio in a Demo mode, go to
Input Settings
. Select
Input1: HDMI > Settings > Audio Settings > Enable Audio > true
, and click
Demo
Mode
.
Settings
You can control the Encoder, Record, and Stream Out configuration from the GUI (see
and
). Settings options are enabled when the pipeline is in the stop
state.
X-Ref Target - Figure 3-11
Figure 3-11:
Encoder Parameter Panel
X19923-112718
Table 3-3:
Encoder Parameter Panel Settings
Encoder Parameter
Setting
Encoder
This can be either H264 or H265.
Profile
The standard defines a sets of capabilities, which are referred to as profiles, targeting
specific classes of applications. These are declared as a profile code (profile_idc) and a set
of constraints applied in the encoder. This allows a decoder to recognize the requirements
to decode that specific stream.
H264 supports Baseline, Main, and High profile. In H265, only the Main profile is supported.
