shielded audio cabling. Uno has eight (8) or sixteen (16) switchable Mic/Line inputs w 48v phantom power depending on
the model.
9.
Network Audio I/O
Uno Series-N and Uno Series-N-AEC model versions include two RJ45 Dante enabled network audio connectors (not to
be confused with the Ethernet connector). 16x16 I/O channels on one RJ45 connector/cable – one RJ45 for redundancy.
5. Install the NeuConsole Software:
The USB drive included with each processor includes a full copy of the Uno’s NeuConsole
software (including Microsoft’s .net framework component) or you can download the Windows 8,
7, Vista, XP compatible NeuConsole software from our web site and install on your computer
(www.xilica.com).
•
When installing our NeuConsole software via our web site and where your PC software does
not include Microsoft’s .net framework component - your PC will use the internet to secure a
copy and continue the installation. If you have no internet connection you will need to use the
included Xilica USB drive for your software installation as it also provides the Microsoft
.net frame work component. Or contact Xilica tech support.
Note
: The Microsoft installation program/process remembers what location you installed from -
the first time you load the NeuConsole software into your computer. This can cause issues if you
try and load a new software Version (update) from a different location than the location originally
used to load the NeuConsole software into your computer (USB, Internet Download, etc).
Solution
: Simply un-install the old NeuConsole software version in Control Panel before you
update your software version each time. You won’t have any update issues and you won’t have
to remember what location you loaded the software from previously or what the source was -
USB, Internet, etc.
•
Make sure the NeuConsole Software version is the latest version (see “About” menu vs the web
site). Make sure the processors Firmware version is compatible with software (view device
firmware version in Network View)
.
See information on Page 4- #6 and Page 11 - #15 to assist.
•
If you have a personal Firewall setup on your computer, a Firewall popup window might be
displayed during the software installation to ask whether users want to “Block” or “Allow”
NeuConsole from accessing the network. Select “Allow” to continue installation.
•
Once installed and working – close the NeuConsole software for now until you are
instructed to open it again.
6. Download and Save Uno Apps (Device Designs):
These are the pre-designed Uno Apps (Device Designs) or DSP schematics for a variety of
applications that you will select from to use in your NeuConsole software and Uno processor in
order to accommodate your specific DSP project design application.
Before you begin working with the NeuConsole software and your Uno processor - go to our web
site at
www.xilica.com
and from Products - Uno Series, select
Uno Apps Library.
Save to a
folder in your computer one, some, or all of the pre-designed
Uno Apps
listed in the Uno Apps
Library (.sxml files). In our example to follow we chose the
Gain Sharing Auto Mixer
Uno App.
And we chose the U0808 version of that specific Uno App since we will be using the U0808
module in software and connecting to an Uno U0808 processor model in our example.
NOTE: The Uno Apps processor version (U0808,U0816,U1608,U1616) must match the Uno
software module you place in the design mode work area within the NeuConsole software in
order to be able to import the Uno app into the software module. The same when transferring or
saving your DSP work in software to a connected, physical Uno processor – the physical
