(b) To Map Physical Device, right click the red Uno U0808
processor module in the work area. Select
“Map Physical
Device”
as shown at right and select the processor device
model you are working with from the drop down list
.
Once
done as shown below on page 14, notice that the
processor module in the Project View/Design Mode work
area has turned from a light see through red color to
solid
red
– indicating
Map
success.
Importing a Pre-Designed Uno App - Device Design into your Processor Module
(1) Again, right click the red Uno U0808 processor module in the
Project View/Design Mode
work
area and select
“Import Device Design from File” -
as shown below left.
(2) That will take you to the folder where you saved your pre-designed Uno Apps early on in this
quick start guide or you can browse to the file where you saved them.
Uno Apps are
.sxml
files
(New Project). Saved DSP design projects are
.pjxml
files (Open Project).
(3) Select the pre-designed
Uno App
- device design (.sxml file) you want to use for this New Design
Project application and then click
“Open”
. We chose the
U0808-Gain Sharing Auto Mixer
Uno
app (the Uno app you choose must match the processor module you are using. For example,
you cannot load a U1616 pre-designed Uno App into a U0808 processor module and device).
(4) Wait a few seconds then double click the red Uno U0808 processor module in the Project
View/Design Mode work area to view the Uno schematic.
