Xilica Audio Design uno series Quick Start Manual Download Page 3

Page: 3 / 21

1. What’s in the Box

•

The Uno Series processor model hardware purchased

•

This hard copy of the Quick Start Guide

•

USB drive with Software, Help File, Quick Start Guide, Spec Sheets

•

IEC socket detachable power cable

•

Detachable 3.5mm Euro terminal block connectors

2. What you need to provide

•

A Windows PC – 1GHz or higher processor

•

Windows 8, 7, Vista, or XP

•

500 MB of free storage space

•

16 Bit or higher colours

•

4GB RAM minimum

•

Network (Ethernet) interface

•

Ethernet cable (Cat5 or 6)

3. Getting Help

•

The included NeuConsole software - the Windows software that controls the Uno processing

and hardware - includes a Help File.
That help file provides a detailed User Manual (software and hardware) as well as this Quick
Start Guide.

•

If you’d like to contact us regarding product support or technical designs, email

[email protected] and we’ll connect you with a solutions engineer. Alternatively, if you’d like
to speak to someone, you can call the following numbers for immediate assistance:

North America & Rest of World: +1 905-770-0055
Europe: +31 29940-1100
China & Hong Kong SAR: +852 2604-9382

Summary of Contents for uno series






















Search results

Summary of Contents for uno series

Reviews:

Related manuals for uno series

Brands by name

Popular brands

Xilica Audio Design uno series, Quick Start Manual

Search results

Summary of Contents for uno series

Reviews:

Related manuals for uno series

Brands by name

Popular brands