Note:
Once you are in
Project View
working on a DSP design you are able to switch back
and forth between “
Project View
” and “
Network View
” by selecting the grey
Network View /
Project View button at the top right of the work page area.
Processor Module
•
From the
System Components
menu under
Component Libraries
on the left, click and
drag the Uno processor module you are going to use for your application and this DSP
design project onto the white work area. For our example we chose the
Uno U0808.
You will notice that the Uno U0808 processor module placed in the project view/design mode
work area is a light see through red color).
Map Physical Device
(a) With the red
Uno U0808
processor module for this application placed in the
Project
View/Design Mode
work area as shown above (and when the processor device is connected to
the NeuConsole software) we need to
Map
or connect the Uno’s software processor module in
the work area with the actual physical Uno processor device that is connected to the PC.
