7
CN1100 Access Point - Installation Guide - G7601 - 3.8
The xMax® CN1100 is an all-IP, high-capacity, high-performance wireless access point that delivers
unmatched range, coverage and reliability in even the most challenging conditions. The CN1100 is a
waterproof, ruggedized device, and built to operate in wide temperature ranges. The CN1100 Access
Point is designed for installation in fixed and rapid deployment platforms.
This manual provides basic instructions for installation and configuration of the CN1100 Access Point.
IMPORTANT
The CN1100 Access Point
MUST
only be installed by a professional installer. For additional
information, please refer to the statement
FCC Part 15 Requirement
on page 12.
The CN1100 Access Point is shipped with the parts needed for installation and operation. These
items are shown below. Be sure each item is included in your product package. If any item is
missing, please contact the place of purchase.
Depending upon the requirements of your installation, you will also need to purchase
additional components such as antennas, cables, and surge protectors. A checklist of the
typically required parts is shown in the topic
Assemble Your Parts and Tools
on page
22
.
PoE++ 56 VDC
Power Supply
AC Power Cord
Weatherproof
Ethernet Kit
Ferrite Beads
Antenna Cables
CN1100 Access Point
GPS Antenna
with right-angle
connector
Mounting Hardware
