31
CN1100 Access Point - Installation Guide - G7601 - 3.8
B
A
C
D
D
C
B
A
These steps outline the basic tasks required to prepare for a successful installation using a panel
antenna. These initial steps prepare the CN1100 Access Point for placement in a service location.
1.
Locate the supplied mounting bracket and secure the CN1100 Access Point to the bracket with
four (4) hex-head screws, as shown.
2.
Align the bracket onto the threaded posts on the back of the xMax Panel Antenna
and then secure it with 4 hex-nuts, as shown.
3.
Using the photos below and the wiring diagram in the topic
4.
5.
Panel
Antenna Configuration on
page 15 as a guide, secure the four supplied Ethernet cables to the antenna connectors and the
CN1100 Access Point connectors.
