9
CN1100 Access Point - Installation Guide - G7601 - 3.8
The CN1100 features seven connectors:
Four external xMax antenna connectors
(N-type Jack, Female Socket)
A connector for an external GPS antenna (TNC Jack, Female Socket)
A weatherproof Ethernet connector
An unused connector
TOP CONNECTORS
BOTTOM CONNECTORS
Tx3/Rx3
Tx1/Rx1
Rx4
Unused Port
Ethernet
Rx2
The CN1100 Access Point Status LED glows to indicate power, network status and hardware fault
conditions:
GREEN
indicates
Normal Operation
Backhaul is present, GPS is present, and the device is transmitting beacons.
Solid RED
indicates that the device is booting up, or no backhaul is detected.
Flashing RED
indicates that no GPS signal is present.
GPS CONNECTOR
LED Status
xMax Network
GREEN
SOLID
NORMAL
RED
SOLID
BOOTING OR
NO BACKHAUL
RED
FLASHING NO GPS SIGNAL
STATUS LED
