72
UNIX
HP-UX Client (Version 10.x)
You can use CentreWare to configure in this environment. Click here for more information.
CentreWare for Unix
CentreWare for Unix supports a variety of Unix and Linux platforms and provides procedures which will
enable you to connect the machine in these environments. To use CentreWare for Unix to configure
printing locate the CentreWare Print and Fax Drivers CDROM delivered with your machine.
Information Checklist
Before starting the installation procedure, please ensure the following items are available or have been
performed:
1.
Ensure that the correct IP Address is being used for the machine. To verify this, print a Configuration
Report from the machine.
At the Machine
2.
Press the [Machine Status] button.
3.
Touch the [Print Reports] button.
4.
Touch [Configuration Report], touch [Print Selected Report], then touch [Close].
The configuration report will print. Verify the addresses detailed under TCP/IP Settings. If the TCP/IP
Settings are incorrectly configured, refer to the Read Me topic of this guide for the path to TCP/IP settings
at the machine.
5.
Ensure the machine is connected to the network with Ethernet cabling.
6.
Ensure you can PING the machine IP address from the Unix workstation
7.
Locate the CentreWare Print and Fax Drivers CD (optional). The CD is contained in the CentreWare
Network Services Pack delivered with your machine.
To Configure your HP-UX Client (Version 10.x)
HP-UX workstations require specific installation steps to communicate with the machine. The machine is a
BSD style UNIX printer, whereas HP-UX is System V style UNIX. Use the correct case when entering
commands; UNIX commands are case sensitive.
1.
Add the machine hostname to the etc/hosts file on the HP-UX workstation.
2.
Ensure that you can ping the machine from the HP-UX workstation, using the hostname found in the /
etc/hosts file.
3.
Use either the GUI method or the tty Method as follows: