background image

138

Network Scanning

Network Scanning is an optional feature for the WorkCentre 7655/7665/7675, purchased from your Xerox 
Sales Representative, and installed using a Network Scanning/E-mail Subscriber Installation Module 
(SIM).

Network Scanning allows a user to scan an original document, convert it to an electronic file, and distribute 
and archive that file in a variety of ways. The final destination of the electronic file depends on the template 
chosen by the user at the device's User Interface. The template may reside on the device, or may be 
cached on the device from a pool of templates pulled from a remote server. The scanned file will be stored 
on a pre-determined network server and then, with the help of server or desktop software:

- Routed to a user's PC desktop for viewing or editing.

- Integrated with a variety of popular document management and workflow applications.

- Sent to a network directory or filing location for later retrieval.

- Sent to an e-mail distribution list.

Summary of Contents for WorkCentre 7675







































































































































































































































































Reviews: