Paper and Media
WorkCentre 7500 Series Multifunction Printer
47
User Guide
3.
Stack the paper against the left rear corner of the tray as shown.
4.
Adjust the guides so that they touch the edges of the stack.
5.
Close the tray.
6.
Verify the size, type, and color of the paper. Change the selection for any incorrect setting.
7.
On the printer touch screen, touch
Confirm
.
Configuring Tray 6 in the High-Capacity Feeder
Tray 6 is a dedicated high-capacity feeder. It must be configured to support the paper in use. If the tray
has never been used, it must be configured for the desired paper size. If you are changing the paper size,
you must reconfigure the tray for the new paper size. For details on supported paper sizes, see
Supported
Paper
on page 38.
Before changing the drawer configuration, always compare the paper size to the Tray 6 configuration. If
the paper size matches, no adjustment is needed.
