Xerox WORKCENTRE 5030, Quick Reference Manual, Page: 76 / 186

Page 4-28 Quick Reference Guide
Stored Programming
Use this feature to program up to 10 commonly used programming sequences. For
example, combinations of selections such as
Edge Erase and Bound Originals .
The machine stores only the programming features for the job, NOT the images.
Each time a stored job is used the images must be scanned.
To use this feature, use the up and down scroll buttons on the scrolling list to select
the required storage location, then select a function button -
Store or Recall
Programming .
Options:
Job Number
Use to scroll to a job number between 1 and 10.
Store
Programming
Use this option to store the current programming selections. If a job has already
been stored under the selected
Job Number , an Overwrite Confirmation Message
appears. If Overwrite is selected, the new programming will be stored.
Recall
Programming
Use this option to retrieve programming that has been stored under a specified job
number. First select a
Job Number , then select Recall Programming . The recalled
programming will overwrite the current copy programming.
After being recalled, the selection can be modified further and re-stored if required.