Xerox WORKCENTRE 5030, Quick Reference Manual, Page: 71 / 186

Quick Reference Guide Page 4-23
Copy
Output Cover
Images
Use this option to select the imaging requirements for the covers. Output Cover
Images options are as follows:
Cover Stock
Use this option to select the tray required for the cover stock.
Inserts
Use this feature to add up to two additional stock types to your job. For example,
you can separate sections using blank sheets or tab stock, or print the first page of
each section on different colored stock to separate chapters.
A combination of standard size media, tab stock, card or colored paper can be used
for the inserts. Load your insert stock into one of the paper trays. If two different
insert stocks are required, load them in different paper trays. The recommendation
is to use trays 1 and 2 for your insert stocks.
To prepare your document for programming the inserts, identify the page number
where the insert is required by counting through the pages. If you require blank
inserts, add blank sheets to your document where the inserts are to be placed. A
maximum of 40 insert sheets can be added to a document.
HINT: Inserts and Covers can be selected in the same job.
Blank Cover
Adds Blank covers to the copies.
1 Sided
Places the first original in the job as the front cover image,
and the last image as the image on the inside back cover of
the document.
2 Sided
Places the first two images of the original set on the front and
back of the front cover. The back cover will use the last two
images in the job.
2 Sided, Rotate Side
2
Produces 2 sided covers with the second side rotated to
enable a “head to toe” style output.