Xerox WORKCENTRE 5030 Quick Reference Manual Download Page 176

Page: 176 / 186

Page 11-4

Quick Reference Guide

Xerox Welcome and Support Center

If a fault cannot be resolved by following the touch screen instructions, check the

Troubleshooting Tips

in the next section - they may help to solve the problem

quickly. If the difficulty persists, contact the

Xerox Welcome and Support Center

The

Welcome and Support Center

will want to know the following information: The

nature of the problem, the Machine Serial number, the fault code (if any) plus the
name and location of your company.

Locating the serial number

NOTE:

The serial number can also be found on a metal plate inside the front door.

Press the

Machine Status

button on

the control panel.

The Machine Information
screen displays.

Select

[Machine Details]

The Customer Support
Number for the Welcome and
Support Center and Machine
Serial Number displays.

Summary of Contents for WORKCENTRE 5030



























































































































































































Search results

Summary of Contents for WORKCENTRE 5030

Reviews:

Xerox WORKCENTRE 5030, Quick Reference Manual, Page: 176 / 186

Search results

Summary of Contents for WORKCENTRE 5030

Reviews: