manualshive.com logo in svg

Xerox WORKCENTRE 5030, Quick Reference Manual, Page: 35 / 186

Share
Download
Xerox WORKCENTRE 5030 Quick Reference Manual Download Page 35

Quick Reference Guide

Page 3-3

Getting Started

Power On or Off

If 

Power Off

 is selected and confirmed, the machine will begin a controlled power 

down sequence. 

NOTE: 

The machine remains on for approximately 30 seconds before the power is 

terminated.

If there are any jobs in the queue, a second pop-up screen will appear warning that 
jobs in the queue will be deleted if the machine is powered off. Confirmation of this 
screen will result in the deletion of any jobs in the queue during the power down 
sequence.

If 

Enter Power Save

 is selected and confirmed, then the machine will immediately 

enter the Power Saver Mode appropriate to its configuration. If there are any jobs in 
the queue, a second pop-up screen is displayed.

To re-activate the machine when in this mode, touch a button on the touch screen 
or control panel.

If 

Quick Restart 

is selected and confirmed then the machine will restart. A pop-up 

screen will appear warning that any jobs in the queue will be deleted.

If 

Cancel

 is selected then the power down options will be cancelled and the 

machine will be available for use.

1

To power ON:

¾

Press the 

ON/OFF

 switch. The 

powering up process takes less 
than 3 minutes. 

NOTE: 

Certain functions of the 

machine, e.g. copying, will be 
available before other functions e.g. 
printing.

2

To power OFF:

¾

Press the 

ON/OFF

 switch. A 

confirmation screen will appear 
asking you to select a power 
down option.

3

Summary of Contents for WORKCENTRE 5030



























































































































































































Reviews:

No comments