Xerox WORKCENTRE 5030, Quick Reference Manual, Page: 61 / 186

Quick Reference Guide Page 4-13
Copy
Bound Originals
This feature is used to copy pages from bound documents onto separate single-
sided or double-sided pages.
The bound original is placed face down on the Document Glass with the spine of
the book lined up with the marker on the rear edge of the glass. Align the top of the
bound original against the rear edge of the document glass. Do not close the
Document Handler during the copying process if
Auto Reduce/Enlarge is selected.
HINT: If necessary, apply a little pressure to the center of the book to flatten it
during scanning.
Options:
Off
The feature is switched off.
Right Page
Copies only the page on the right when looking at the open book, face up.
Left Page
Copies only the page on the left when looking at the open book, face up.
Both Pages
Copies both pages of an open book and places each page on a separate sheet of
paper.
Binding Erase
Erases a specified area from the center of the book to eliminate unwanted marks.
When
Left Page or Right Page is selected between 0 and 1.0 inch can be erased.
When Both Pages is selected, between 0 and 2.0 inches can be erased.