manualshive.com logo in svg

Xerox WORKCENTRE 5030, Quick Reference Manual, Page: 36 / 186

Share
Download
Xerox WORKCENTRE 5030 Quick Reference Manual Download Page 36

Page 3-4

 

Quick Reference Guide 

Loading Paper

1

¾

Open the required paper tray.

NOTE: 

 Paper trays 1 and 2 are fully 

adjustable for all stock sizes between 
8.5" x 5.5" to 11" x 17". Paper trays 3 
and 4 are dedicated paper trays 
which can be adjusted to hold either 
8.5" x 11" or A4 long edge feed 
paper only.

2

¾

Load paper. Paper must not be 
loaded above the fill line. 

¾

Close the tray.

NOTE: 

For paper trays 1 and 2, 

ensure the guides are just touching 
the paper, otherwise the size 
automatically detected may be 
incorrect.

3

¾

Select 

[Confirm] 

OR

 

select 

[Change Size]

 and/or 

[Change 

Type and Color]

 to reprogram the 

tray if the paper size, type or color 
has changed.

NOTE: 

Ensure the Size, Type and 

Color are all correct. For standard 
copy paper the following should 
apply: 

Size 

- 8.5" x 11"

Type

 - Plain paper

Color

 - White

Summary of Contents for WORKCENTRE 5030



























































































































































































Reviews:

No comments