Xerox VersaaLink B600 User Manual Download Page 110

Page: 110 / 170

5. Remove the cleaning pad from the cleaning tool by pushing in on the two tabs. Properly recycle the

used cleaning pad.

Note

If the cleaning pad is dirty, replace it. A replacement cleaning pad is included with the Drum Cartridge
Replacement Kit.

6. In necessary, install a new cleaning pad onto the cleaning tool.

7. To remove any debris or toner dust, set the cleaning tool on the LED Lens Block. Slide the cleaning

tool until it stops at one end of the LED Lens Block. Then slide the cleaning tool in the other direction
until it stops at the opposite end. Repeat this motion two more times.

Xerox

VersaaLink

B600/B610 Printer

7-4

User Guide

Maintenance

Summary of Contents for VersaaLink B600











































































































































































Search results

Summary of Contents for VersaaLink B600

Reviews:

Related manuals for VersaaLink B600

Brands by name

Popular brands

Xerox VersaaLink B600, User Manual

Search results

Summary of Contents for VersaaLink B600

Reviews:

Related manuals for VersaaLink B600

Brands by name

Popular brands