Xerox VersaaLink B600, User Manual

Page: 28 / 170

Installation and Setup
For reference:
• Installation Guide packaged with your printer
• Online Support Assistant at
www.xerox.com/office/VLB600_VLB610docs
Installation and Setup Overview
Before you print, ensure that your computer and the printer are plugged in, powered on, and connected.
Configure the initial settings of the printer, then install the print driver software and utilities on your
computer.
You can connect to your printer directly from your computer using USB, or connect to a network using
an Ethernet cable or wireless connection. Hardware and cabling requirements vary for the different
connection methods. Routers, network hubs and switches, modems, Ethernet cables, and USB cables
are not included with your printer and must be purchased separately. Xerox recommends an Ethernet
connection because it is typically faster than a USB connection, and it provides access to the Embedded
Web Server.
For more information, refer to the System Administrator Guide at
www.xerox.com/office/VLB600_VLB610docs .
Selecting a Location for the Printer
1. Select a dust-free area with temperatures from 10–32°C (50–90°F), and relative humidity 10–85%.
Note
Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room can cause
condensation inside the printer, directly interfering with image transfer.
2. Place the printer on a level, solid, non-vibrating surface with adequate strength to hold the weight
of the printer. The printer must be horizontal with all four feet in solid contact with the surface.
To find the weight for your printer configuration, refer to
Weights and Dimensions .
3. Select a location with adequate clearance to access supplies and to provide proper ventilation.
To find the clearance requirements for your printer, refer to Clearance Requirements .
4. After positioning the printer, you are ready to connect it to the power source and computer or network.
Xerox ® VersaaLink ® B600/B610 Printer 2-10
User Guide
Getting Started