manualshive.com logo in svg

Xerox Stacker 1000, User Manual, Page: 61 / 396

Share
Download
Xerox Stacker 1000 User Manual Download Page 61

8

Advanced Stock Setup

The Advanced Stock Setup feature allows the user to further customize stocks beyond
the typical size, weight, type, and other characteristics.

The Advanced Stock Setup feature is accessed from either the Stock Properties window
or the New Stock Setup window.

Different media (including paper type, weight, and coating/uncoating, paper curl) may
require specific and/or special handling by the machine as it is moving through the paper
path. For example, some media types may skew or curl as they progress through the
printing path of the machine. This may occur on frequently-run jobs and/or on jobs with
a high volume output.

8-1

Xerox

®

 Color 800/1000 Press

User Guide

Summary of Contents for Stacker 1000













































































































































































































































































































































































































Reviews:

No comments