manualshive.com logo in svg

Xerox Stacker 1000, User Manual, Page: 50 / 396

Share
Download
Xerox Stacker 1000 User Manual Download Page 50

• Stock Library: Much like the RML, this list contains the names of all the stocks that

are available for the machine. Unlike the RML, this is a list of stocks that were either
created by the user or copied and/or edited from the Recommended Media List (RML).
The user selects a desired stock for each tray and/or for specific print jobs.

Related Topics:

Stock management

Recommended Media List (RML)

Manage Stock Library window

Recommended Media List (RML)

Always refer to the Recommended Media List for paper guidelines. The Recommended
Media List is updated as required to include new papers and other media. The RML is
available at 

www.xerox.com

.

The RML is also available on your machine either through the Tray Properties window
or from the Stock Library feature.

Xerox

®

 Color 800/1000 Press

7-2

User Guide

Manage Stock Library

Summary of Contents for Stacker 1000













































































































































































































































































































































































































Reviews:

No comments