manualshive.com logo in svg

Xerox Stacker 1000, User Manual, Page: 45 / 396

Share
Download
Xerox Stacker 1000 User Manual Download Page 45

Tray Properties

From the Tray Properties window the user can view and select a variety of functions on
the paper tray. Selections available for the tray vary depending on whether the user is
logged in as Operator or Administrator. The following information represents the
selections available when logged in as Operator.

• Stock Details: This area displays the current tray information including the paper

size, type, weight, color, and orientation of the paper (LEF or SEF).

-

Comment: This section allows the user to enter information about the paper, such
as a brand name or job-specific information. A maximum of 256 characters is
allowed.

-

Long Edge Feed/Short Edge Feed (LEF/SEF): Indicates the orientation direction
that the paper is loaded in the tray: either in the LEF or SEF direction.

• Enable Tray: Permits the selected tray to be used.
• Disable Tray: Prohibits the selected tray to be used.

6-7

Xerox

®

 Color 800/1000 Press

User Guide

Paper information

Summary of Contents for Stacker 1000













































































































































































































































































































































































































Reviews:

No comments