manualshive.com logo in svg

Xerox Stacker 1000, User Manual, Page: 325 / 396

Share
Download
Xerox Stacker 1000 User Manual Download Page 325

18

SquareFold Trimmer
Module

Overview

The SquareFold Trimmer Module is an optional finishing device that is used in conjunction
with another optional finishing device that contains a booklet maker.

Note

The SquareFold Trimmer Module requires a finisher with a booklet maker attached.

The SquareFold Trimmer Module:

• Receives the booklet from the booklet maker area of the finisher
• Flattens the booklet spine, thereby reducing the booklet’s thickness and giving it the

appearance of a perfect-bound book

• Trims/cuts away the face (edge) of the booklet, resulting in a neat finished edge

The booklet is assembled and stapled in the booklet area of the finisher; therefore, the
booklet enters the SquareFold Trimmer Module already assembled. Any adjustments to
the image of the original and its placement on the booklet page must be done from the
machine UI, your print driver, or from the print server.

18-1

Xerox

®

 Color 800/1000 Press

User Guide

Summary of Contents for Stacker 1000













































































































































































































































































































































































































Reviews:

No comments