manualshive.com logo in svg

Xerox Stacker 1000, User Manual, Page: 24 / 396

Share
Download
Xerox Stacker 1000 User Manual Download Page 24

SquareFold Trimmer Module

The SquareFold Trimmer Module is an optional finishing device that is used in conjunction
with a finishing device that contains a booklet maker.

Note

The SquareFold Trimmer Module is shown here with the required Interface Module and
the required Booklet Maker Finisher.

Related Topics:

SquareFold Trimmer Module

Standard Finisher Plus

The Standard Finisher Plus serves as an interface to transfer paper between the print
engine and any third-party, Document Finishing Architecture (DFA) device attached to
the machine.

Note

The Standard Finisher Plus requires the Interface Module.

Related Topics:

Standard Finisher Plus

Xerox

®

 Color 800/1000 Press

1-12

User Guide

Product overview

Summary of Contents for Stacker 1000













































































































































































































































































































































































































Reviews:

No comments