manualshive.com logo in svg

Xerox Stacker 1000, User Manual, Page: 38 / 396

Share
Download
Xerox Stacker 1000 User Manual Download Page 38

-

Date and time

-

Productivity settings

-

Power saver settings

-

Attention sounds

-

Tray options, such as automatic tray switching (ATS)

-

Output Devices

-

Image quality options

-

Full Width Array

• Profiles functions, including:

-

Alignment

-

Fold Adjustment; this feature is displayed if the optional finisher is attached

-

Finishing Devices: This option is available only if an optional, third-party, Document
Finishing Architecture (DFA) device is attached to your system. This feature allows
you to choose specific settings for that attached DFA device.

For detailed information and instructions on the various Administrator functions, refer
to the System Administration Guide.

Xerox

®

 Color 800/1000 Press

5-2

User Guide

System Administrator overview

Summary of Contents for Stacker 1000













































































































































































































































































































































































































Reviews:

No comments