Installation and Setup
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
43
User Guide
Setting Energy Saver Mode
You can set the time the printer spends idle in ready mode before the printer transitions to a lower
power level.
To configure Energy Saver settings:
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Device Settings
>
General
>
Energy Saver
.
Note:
If this feature does not appear, log in as a system administrator. For details, see
Logging In as
the System Administrator at the Control Panel
on page 32.
3.
On the Energy Saver screen, select an option:
−
Intelligent Ready
: The printer wakes and sleeps based on previous usage.
−
Job Activated
: The printer wakes when it detects activity. To change the default Low-Power
and Sleep timeout periods, touch
Energy Saver Timers.
•
To set the delay before the printer enters Low-Power mode, touch the Minutes field, then
to set the number, touch the arrows.
•
To set the delay before the printer enters Sleep mode, touch the Minutes field, then to set
a number, touch the arrows.
•
Touch
OK
.
−
Scheduled
: The printer wakes and sleeps according to a schedule that you specify. To specify
the schedule, touch
Scheduled Settings.
•
Touch a day of the week in the list.
•
To allow the printer to wake when it senses activity on that day, touch
Activity
.
•
To wake the printer at a specific time, touch
Time
. To set the time that the printer wakes
up on the specified day, touch
Warm Up Time
, then to select the time, touch the arrows.
Touch
OK
. To specify the time that the printer sleeps on the specified day, touch
Energy
Saver Time
, then to select the time, touch the arrows. Touch
OK
.
•
Touch
OK
.
4.
Touch
OK
.
