Xerox Phaser 7800 User Manual Download

Page: 13 / 336

Safety

Xerox

WorkCentre

7800/7800i Series Color Multifunction Printer

User Guide

Electrical Safety

Read the following instructions carefully before operating your printer. Refer to these instructions to

ensure the continued safe operation of your printer.

Your Xerox

printer and supplies are designed and tested to meet strict safety requirements. These

include safety agency evaluation and certification, and compliance with electromagnetic regulations

and established environmental standards.

The safety and environment testing and performance of this product have been verified using Xerox

materials only.

Note:

Unauthorized alterations, which can include the addition of new functions or connection of

external devices, can affect the product certification. For more information, contact your Xerox

representative.

Power Cord

•

Use the power cord supplied with your printer.

•

Plug the power cord directly into a properly grounded electrical outlet. Ensure that each end of the

cord is connected securely. If you do not know if an outlet is grounded, ask an electrician to check

the outlet.

•

Do not use a ground adapter plug to connect the printer to an electrical outlet that does not have a

ground connection terminal.

WARNING:

Avoid the potential of electrical shock by ensuring that the printer is grounded properly.

Electrical products can be hazardous if misused.

•

Verify that the printer is plugged into an outlet that is providing the correct voltage and power.

Review the electrical specification of the printer with an electrician if necessary.

•

Do not place the printer in an area where people can step on the power cord.

•

Do not place objects on the power cord.

•

Replace the power cord if it becomes frayed or worn.

•

Do not unplug or plug the power cord while the printer is turned on.

•

To avoid electrical shock and damage to the cord, grasp the plug when unplugging the power cord.

•

The electrical outlet must be near the printer and must be easily accessible.

The power cord is attached to the printer as a plug-in device on the back of the printer. If it is necessary

to disconnect all electrical power from the printer, disconnect the power cord from the electrical outlet.

For details, see

Turning the Printer On and Off

on page 39.

Summary of Contents for Phaser 7800

















































































































































































































































































































































Search results

Summary of Contents for Phaser 7800

Reviews:

Related manuals for Phaser 7800

Brands by name

Popular brands

Xerox Phaser 7800, User Manual

Search results

Summary of Contents for Phaser 7800

Reviews:

Related manuals for Phaser 7800

Brands by name

Popular brands