Xerox Phaser 7800 User Manual Download

Page: 209 / 336

Maintenance

Xerox

WorkCentre

7800/7800i Series Color Multifunction Printer 209

User Guide

Replacing the Waste Toner Container

A message appears on the control panel when the waste toner container must be replaced.

When replacing the waste toner container, clean the printhead lenses. For details, see Cleaning the

Printhead Lenses.

CAUTION:

Spread paper on the floor to catch possible toner spills.

WARNING:

If you spill any toner in the printer, wipe it up using a moist cloth. Never use a vacuum

cleaner to remove spilled toner. Sparks inside the vacuum cleaner can cause a fire or explosion.

WARNING:

If you accidentally get toner on your clothes, lightly dust them off as best as you can. If

some toner remains on your clothes, use cool water, not hot, to rinse off the toner. If toner gets on

your skin, wash it off with cool water and a mild soap. If you get toner in your eyes, wash it out

immediately with cool water and consult a doctor.

CAUTION:

Do not perform this procedure when the printer is copying or printing.

Open the front cover of the printer.

Remove the new waste toner container from the packaging. Retain the packaging.

Summary of Contents for Phaser 7800

















































































































































































































































































































































Search results

Summary of Contents for Phaser 7800

Reviews:

Related manuals for Phaser 7800

Brands by name

Popular brands

Xerox Phaser 7800, User Manual

Search results

Summary of Contents for Phaser 7800

Reviews:

Related manuals for Phaser 7800

Brands by name

Popular brands