Xerox Phaser 7800 User Manual Download

Page: 239 / 336

Troubleshooting

Xerox

WorkCentre

7800/7800i Series Color Multifunction Printer 239

User Guide

Restarting the Printer

Locate the two power switches.

Turn off the switch on the top of the printer. A message appears on the control panel that warns

that the printer is turning off.

If the printer turns off, then turn on the switch to restart the printer.

If the printer does not turn off after two minutes, then open the front cover and turn off the second

switch.

Turn on the bottom switch, then turn on the top switch to restart the printer.

If the problem is not resolved by restarting the printer, see the table in this chapter that best describes

the problem.

Printer Does Not Turn On

Probable Causes

Solutions

The power cord is not correctly plugged into

the outlet.

Turn off the printer, and plug the power cord securely into the

outlet.

Something is wrong with the outlet

connected to the printer.

•

Plug another electrical appliance into the outlet and see if it

operates properly.

•

Try a different outlet.

One of the power switches is not turned on.

Turn off both of the power switches. Wait two minutes then turn on

both of the switches.

The printer is connected to an outlet with a

voltage or frequency that does not match the

printer specifications.

Use a power source with the specifications listed in Electrical

Specifications.

CAUTION:

Plug the three-wire cord (with grounding prong) directly into a grounded AC outlet only.

Do not use a power strip. If necessary, contact a licensed electrician to install a properly grounded

outlet.

Summary of Contents for Phaser 7800

















































































































































































































































































































































Search results

Summary of Contents for Phaser 7800

Reviews:

Related manuals for Phaser 7800

Brands by name

Popular brands

Xerox Phaser 7800, User Manual

Search results

Summary of Contents for Phaser 7800

Reviews:

Related manuals for Phaser 7800

Brands by name

Popular brands