Xerox PHASER 7500 Service Manual Download Page 710

Page: 710 / 992

8-148

Phaser 7500 Printer Service Manual

Service Parts Disassembly

REP 14.3 L/H Cover Assembly

PL14.2.2

Caution

Do not touch the Roll surface of the 2nd BTR Assembly.

1. Remove the Top Rear Cover and the Rear Cover (REP 19.6,

page 8-217

2. Remove the Left Rear Cover (REP 19.4,

page 8-215

3. Remove the wiring harness that is connected to the Left Hand Cover Assembly

from the 2 clamps that secure it.

4. Disconnect the wiring harness connector that is connected to the Left Hand

Cover Assembly.

5. Remove the KL Clip that secures the Rear Support at the rear, and remove the

Rear Support from the Left Hand Cover Assembly.

6. Turn the Front Support at the front counterclockwise by 90° and remove the

Front Support from the hole of the Frame.

7. Lift up the Left Hand Cover Assembly while keeping it horizontal and remove it

from the printer.

s7500-211

Summary of Contents for PHASER 7500
































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PHASER 7500

Reviews:

Related manuals for PHASER 7500

Brands by name

Popular brands

Xerox PHASER 7500, Service Manual

Search results

Summary of Contents for PHASER 7500

Reviews:

Related manuals for PHASER 7500

Brands by name

Popular brands