Xerox PHASER 7500 Service Manual Download Page 727

Page: 727 / 992

Phaser 7500 Printer Service Manual

8-165

Service Parts Disassembly

REP 14.15 Inner Chute Assembly

PL14.5.19

1. Remove the Duplex Assembly (REP 14.12,

page 8-161

2. Release the 3 hooks that secure the Sensor Cover to the Duplex Assembly and

remove the Sensor Cover.

3. Disconnect the wiring harness connector that is connected to the Duplex Wait

Sensor.

4. Release the wiring harness from the 3 hooks on the Inner Chute Assembly and

move it towards the Duplex Motor side.

5. Remove 2 screws (silver, Tapped, 8mm) that secure the Motor Cover to the

printer.

6. Release the Motor Cover from the protrusion of the Inner Chute Assembly and

remove the Motor Cover.

7. Remove 5 screws (silver, Tapped, 8mm) that secure the Inner Chute Assembly

to the Duplex Assembly.

8. Remove the Inner Chute Assembly from the Duplex Assembly.

s7500-225

Motor Cover

Sensor Cover

s7500-226

Summary of Contents for PHASER 7500
































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PHASER 7500

Reviews:

Related manuals for PHASER 7500

Brands by name

Popular brands

Xerox PHASER 7500, Service Manual

Search results

Summary of Contents for PHASER 7500

Reviews:

Related manuals for PHASER 7500

Brands by name

Popular brands