Xerox Phaser 3300, Servce Manual

Page: 238 / 296

9-4 Phaser 3300MFP Service Manual
Parts List
Using the Parts List
■
ID No.: The callout number from the exploded part diagram.
■
Name/Description: The name of the part to be ordered and the number
of parts supplied per order.
■
Part Number: The material part number used to order that specific part.
■
Parts identified throughout this manual are referenced PL#.#.#; For
example, PL3.1.10 means the part is item 10 of Parts List 3.1.
■
The notation (NS) next to a part indicates that particular part is not
spared, but contained in a kit or major assembly.
■
The notation “J1<>J2 and P2” is attached to a wire harness. It indicates
that connector Jack 1 is attached to one end of the wire harness and
connector J2 is attached to the other end that is plugged into P2.
Note
Only parts showing part numbers are available for ordering by support.
Parts not showing part numbers are available on the parent assembly.
Abbreviation Meaning
C C-ring
E E-ring
KL K-clip
S Screw