Xerox Phaser 3300 Servce Manual Download Page 145

Page: 145 / 296

Phaser 3300MFP Service Manual

7-5

Cleaning and Maintenance

Maintenance

RIP (Repair, Inspect, and Prevent) Procedure

Perform these routine maintenance procedures during the course of servicing
the printer.

■

Clean the Feed Rollers, Exit Rollers, and Guides; replace if necessary.

■

Remove and clean the paper trays.

■

Print a Configuration and Error History pages;

diagnose, and repair any

problems as indicated.

■

Check the printer engine and image processor firmware fans; if
necessary, clean (dust or vacuum) these areas.

■

Check cleanliness of the interior and exterior, including fans; if necessary,
clean (dust or vacuum) these areas.

■

Review proper printer operation using a customer file, if possible. Check
with the customer regarding any special applications they may be using.

■

Review with the customer all work that was performed and discuss proper
printer care.

Summary of Contents for Phaser 3300








































































































































































































































































































Search results

Summary of Contents for Phaser 3300

Reviews:

Related manuals for Phaser 3300

Brands by name

Popular brands

Xerox Phaser 3300, Servce Manual

Search results

Summary of Contents for Phaser 3300

Reviews:

Related manuals for Phaser 3300

Brands by name

Popular brands