Xerox Phaser 3300 Servce Manual Download Page 143

Page: 143 / 296

Phaser 3300MFP Service Manual

7-3

Cleaning and Maintenance

8. Remove and clean the paper trays.

9. Clean all rubber rollers with a lint-free cloth slightly dampened with cold

water.

Cleaning the Print Cartridge

Caution

Do not expose the Print Cartridge to light for more than 5 minutes. Cover the
Print Cartridge to avoid damage.

1. Open the Front Cover.

2. Use a dry lint-free cloth to wipe any dust and/or spilled toner from the

Print Cartridge area. Remove any paper debris from the area.

s3300mfp-205

Summary of Contents for Phaser 3300








































































































































































































































































































Search results

Summary of Contents for Phaser 3300

Reviews:

Related manuals for Phaser 3300

Brands by name

Popular brands

Xerox Phaser 3300, Servce Manual

Search results

Summary of Contents for Phaser 3300

Reviews:

Related manuals for Phaser 3300

Brands by name

Popular brands