Initial Operation · Inserting Starter Cartridge ¦ 27
EN
Inserting Starter Cartridge
Plug’n’Print Card
Before you can receive documents, make copies, or print, a toner cartridge must be inserted
into the device. For this reason, a starter cartridge is supplied with the device. The toner level
memory for this starter cartridge was set at the factory. The starter cartridge need not be up-
dated with a Plug’n’Print card. For each additional toner cartridge that you insert into your
device, you must update the toner level memory with the Plug’n’Print card provided.
1.
Open the cover by taking hold of
both
document guides and tipping the cover back-
ward.
2.
Take the new toner cartridge from the package.
3.
Remove the black protective foil and other packaging material,
but do not yet remove
the protective strip from the cartridge
.
4.
Shake the new toner cartridge back and forth several times in order to distribute the ton-
er evenly, thereby improving the print quality.
5.
Only after
completely pull off the protection strip located on the left side of the car-
tridge.
DANGER!
Escaping Toner Dust!
Never open a toner cartridge. If toner dust is released into the air, you should
avoid allowing it to contact your skin and eyes. Do not inhale the released toner
dust. Remove the toner dust from clothing or objects with cold water; hot water
would only cause the toner to set.
DANGER!
Escaping Toner Dust!
Once you have removed the protection strip, do not shake the toner cartridge
any more. Otherwise, it is possible that toner dust will be released into the air.
Summary of Contents for LF8040.8045
