24 ¦ Initial Operation · Attaching the Document Support
EN
Attaching the Document Support
Attaching the Document Support
Insert the document support into the two openings in the cover. The document support
should snap securely into place.
Dokumentenhalter anbringen
Loading Paper
Requirements
Before you can receive documents or make copies, you must load paper into the device.
Please use only appropriate paper in standard format
A4 · 210¦×¦297 millimetre
·
preferably80¦g/m
2
. Follow the specifications in the technical data.
Loading Paper
Preparing Paper
1.
Remove the cover from the paper tray.
2.
Put in only as much paper as will fit under the raised limit markers on the upper edge of
the paper tray (see also the drawings on the cover of the paper tray). You can load up
to
250
sheets.
Notice
Loading Paper
Separate the paper sheets by fanning them out, then align them by tapping edge
of the stack lightly against a flat surface. This will prevent several sheets of paper
from being drawn in all at once.
CAUTION!
Initial Operation!
Please remove the protective cardboard from the paper tray before loading pa-
per and replacing the paper tray into the device.
Summary of Contents for LF8040.8045
