Xerox FreeFlow, Operator And Administrator Manual

Page: 228 / 308

FreeFlow Process Manager Operator and Administrator Guide 2-176
Workflow Builder
Adding or editing a folder-based profile
A combined total of 10 folder-based profiles and CLI profiles can
be configured for each external process. For folder-based profiles,
the input, output, and error locations must reside on the same
remote machine, or on the same local machine.
To add or edit a folder-based profile
Refer to Adding or editing an external process to add an external
process, and then set up a folder-based profile as follows:
1. In the Folder Profile Setup dialog, enter or change the name
for the profile.
NOTE: Changing a name or a folder affects existing workflows.
2. To select process input, process output, and error folders, do
the following:
NOTE: You will be asked for a user name and password when a
remote location is selected during setup.
a. Select [ Browse ].
b. In the Browse For Folder dialog, do one of the following:
– Select the desired folder, and then select [ OK ].
If you select a remote location, the Remote Connection
dialog displays. Enter the appropriate User name and
Password, and select [
OK ].
– Select [ Make New Folder ], name the folder, and select
[ OK ].
3. In the timeout drop box, select a duration.
4. Select [
OK ]. If you edited an existing profile, a confirmation
dialog displays. The new profile displays in the Process
Profiles text box.