manualshive.com logo in svg

Xerox DocuPrint Network Printer Series Guide, Client Manual, Page: 71 / 187

Share
Download
Xerox DocuPrint Network Printer Series Guide Client Manual Download Page 71

SUBMITTING PRINT JOBS USING MACINTOSH DRIVERS

GUIDE TO SUBMITTING JOBS FROM THE CLIENT

4-3

6. If you want to perform operations during printing, set the 

Background Printing option to [On].

Note:

 Once background printing is on, it remains in effect 

whenever you print until it is turned off. You may notice that 
some operations are slower with Background Printing set to 
[On].

7. Close the Chooser dialog box by clicking the box in the upper 

left corner of the menu window.

8. If you changed your destination printer, click [OK] when you see 

the following message:

“You have changed your current printer. Please choose “Page 
Setup...” in all of the open applications.”

You are now ready to send documents to the DocuPrint printer.

Summary of Contents for DocuPrint Network Printer Series Guide




























































































































































































Reviews:

No comments