Xerox DocuPrint Network Printer Series Guide, Client Manual, Page: 177 / 187

GUIDE TO SUBMITTING JOBS FROM THE CLIENT 7-1
7. 7 Color mismatch
Note: The information in this chapter applies to models 4850/4890/
92C NPS only.
The following table shows the status at the Printer Controller and the
results of the print out when using the
lpr and the print commands.
Table 7-1. Color match/mismatch results
HighlightColor attribute MapColor attribute Mismatch Action attribute Result
same as color
loaded in printer matches HighlightColor
attribute Abort, Operator, Ignore/
UseLoadedColor Document prints in
loaded color.
same as color
loaded in printer doesn’t match
HighlightColor attribute Abort, Operator, Ignore/
UseLoadedColor Document prints
MapColor portions of
document in loaded color.
not the same as color
loaded in printer matches HighlightColor
attribute Ignore/UseLoadedColor Document prints in
loaded color.
not the same as color
loaded in printer doesn’t match
HighlightColor attribute Ignore/UseLoadedColor Document prints
MapColor portions of
document in loaded color.
not the same as color
loaded in printer don’t care Abort Job is cancelled.
not the same as color
loaded in printer matches HighlightColor
attribute Operator Job is Ineligible until
Operator changes color
loaded in printer to the
HighlightColor requested.
Document then prints in
new loaded color
not the same as color
loaded in printer doesn’t match
HighlightColor attribute Operator Job is Ineligible until
Operator changes color
loaded in printer to the
Highlightcolor requested.
Document then prints
MapColor portion of
document in new loaded
color