Xerox DocuPrint Network Printer Series Guide Client Manual Download Page 131

Page: 131 / 187

SUBMITTING PRINT JOBS USING WINDOWS NT 4.0 DRIVERS

GUIDE TO SUBMITTING JOBS FROM THE CLIENT

5-23

Adding Special Pages

Follow these steps to add special pages:

1. From the DocuPrint NPS Setup window, click the Special

Pages... icon.

2. From the Special Pages dialog box perform the following:

In the [From] text box, enter the number of the first page in
the range of Special Pages.

In the [To] text box, enter the number of the last page in the
range of Special Pages.

Click the [Paper Stock] list box, or click the [Stocks...] icon
on the right and refer to the section “Specifying paper
stocks” for details.

Click the paper stock you want to use for the Special Pages.

3. Click [Add].

4. Continue adding Special Pages until you have added all that

you want. You can define a maximum of 250 Special Pages
entries/items.

5. To save the parameters you specified and return to the

DocuPrint NPS Setup window, click [OK]. To return to the
DocuPrint NPS Setup window without saving any changes, click
[Cancel].

Summary of Contents for DocuPrint Network Printer Series Guide




























































































































































































Search results

Summary of Contents for DocuPrint Network Printer Series Guide

Reviews:

Xerox DocuPrint Network Printer Series Guide, Client Manual, Page: 131 / 187

Search results

Summary of Contents for DocuPrint Network Printer Series Guide

Reviews: