manualshive.com logo in svg

Xerox DocuPrint Network Printer Series Guide, Client Manual, Page: 27 / 187

Share
Download
Xerox DocuPrint Network Printer Series Guide Client Manual Download Page 27

SETTING UP WORKSTATIONS

GUIDE TO SUBMITTING JOBS FROM THE CLIENT

2-7

Setting up Macintosh workstations

This section describes the steps for installing the Xerox Document 
Submission Client Software and the appropriate PPD (PostScript 
Printer Description) file.

Preparing for Installation

Before installing the software, make sure your computer has the 
following hardware and software:

•

2 MB of Random Access Memory (RAM)

•

A properly configured network card, or a bridge from localTalk 
to the network

•

A 3.5-inch, 1.4-MB diskette drive

•

A hard drive

•

AppleShare version 2.0 or above

•

System 7.0 or greater

•

EtherTalk, version 1.0 or above

•

Ethernet software that is associated with your Ethernet card

•

Apple LaserWriter Driver, version 7.11 or higher. Version 8.0 or 
higher is recommended for use with PPD files, since earlier 
version do not recognize PPD files.

Note:

You cannot run the print job submission utility if you have the 

QuickDraw GX environment installed.

Summary of Contents for DocuPrint Network Printer Series Guide




























































































































































































Reviews:

No comments