manualshive.com logo in svg

Xerox DocuPrint Network Printer Series Guide, Client Manual, Page: 2 / 187

Share
Download
Xerox DocuPrint Network Printer Series Guide Client Manual Download Page 2

ii

GUIDE TO SUBMITTING JOBS FROM THE CLIENT

Xerox Corporation
701 S. Aviation Boulevard
El Segundo, CA 90245

©1999, 2000 by Xerox Corporation. All rights reserved.

Copyright protection claimed includes all forms and matters of 
copyrightable material and information now allowed by statutory or 
judicial law or hereinafter granted, including without limitation, 
material generated from the software programs which are displayed 
on the screen, such as icons, screen displays, looks, etc.

Printed in the United States of America.

Publication number: 721P87481

Xerox® and all Xerox products mentioned in this publication are 
trademarks of Xerox Corporation. Products and trademarks of other 
companies are also acknowledged.

Changes are periodically made to this document. Changes, technical 
inaccuracies, and typographic errors will be corrected in subsequent 
editions.

Summary of Contents for DocuPrint Network Printer Series Guide




























































































































































































Reviews:

No comments