Xerox DocuPrint Network Printer Series Guide, Client Manual, Page: 115 / 187

SUBMITTING PRINT JOBS USING WINDOWS NT 4.0 DRIVERS
GUIDE TO SUBMITTING JOBS FROM THE CLIENT 5-7
Printing from Windows NT 4.0
You can send documents to your DocuPrint printers from Windows
NT 4.0 in several ways:
•
From within your Windows applications, using the Xerox
DocuPrint PostScript level 2 printer driver.
•
From within your Windows applications, using the Windows NT
native printer driver and the appropriate DocuPrint NPS PPD
file (see list below).
•
From within your Windows applications, using a third-party
PostScript or PCL printer driver.
Note: If you use a third-party PostScript printer driver, some
drivers provide access to Xerox printer-specific features by
using the following Xerox PPD files:
— XDP4850.PPD
— XDP4890.PPD
— XDP92C.PPD
— XDP4050.PPD
— XDP4090.PPD
— XDP4635.PPD
— XDP180.PPD
— XDP96.PPD
Caution: Third-party printer drivers have not been tested with
DocuPrint NPS. Make sure to test any third-party driver for
compatibility with your system.
•
From the Xerox Document Submission (XDS) software.
•
From the Xerox Quick Print software.
Both XDS and Quick Print provide a series of dialog boxes you use
to select a document (PDL or print ready file), set up a job ticket, and
submit your print job.
The following sections explain how to print from your Windows NT
4.0 applications. For information on printing through the XDS
software, refer to the
Guide to job submission for Windows 3.1/95/NT
4.0 . For information on printing through the Quick Print software,
refer to the chapter “Submitting print jobs from Quick Print for
Windows NT 4.0” in this guide.