Xerox DocuPrint C1190 FS, User Manual

Page: 158 / 233

Description of Menu Items
9-12
■
Country : Specifies the country where the printer is used.
Note:
Country must be set before faxes can be sent.
System Settings
The System Settings menu is used to configure basic printer settings, such as for alarm and Power Saver
mode.
■
Power Saver Timer : Specifies the transitional time of Low Power Timer and Sleep Timer in
increments of 1 minute.
■
Low Power Timer : 5 min. to 60 min. (default is 5 min.)
■
Sleep Timer : 1 min. to 6 min. (default is 6 min.)
For details, refer to Power Saver Mode on page 2-10.
■
Power Saver Wake Up : Specifies whether or not the printer exits Power Saver mode when the
external telephone rings.
■
OffHook WakeUp
■
On (default): The printer exits Power Saver mode.
■
Off : Select this if you want to have the printer kept in Power Saver mode.
■
Auto Reset : Specifies the time the printer waits for further console input before automatically
resetting the settings for COPY, SCAN, or FAX and returning to the standby mode.
■
Fault Time-out : Specify the time for an automatic timeout for a job fault.
■
Job Time-Out : You can cancel a printing process when it goes beyond a set time period. Set the time
until the print job is canceled. When this timeout expires, the print job is canceled.
■
On : 5 sec. to 300 sec. (default: 30 sec.): Specifies the amount of time in increments of 1 second the
printer waits for additional data before it cancels the job.
■
Off : Cannot cancel.
■
Clock Settings : Specifies the date and time.
■
Set Date
■
Set Time
■
Date Format : Select either yy/mm/dd, mm/dd/yy, or dd/mm/yy.
■
Time Format : 12 or 24 hour formats are available.
■
Time Zone : Set the time zone based on Coordinated Universal Time (UTC) for your location.
■
Alert Tone : Specifies whether to turn on the alarm when an error occurs in the printer.
■
Panel Select Tone (default: Normal)
■
Panel Alert Tone (default: Off)
■
Machine Ready Tone (default: Normal)
■
Copy Job Tone (default: Normal)
■
Non-Copy Job Tone (default: Normal)
■
Fault Tone (default: Normal)
■
Alert Tone (default: Normal)
■
Out of Paper (default: Normal)
■
Low Toner (default: Off)
■
Auto Clear Alert (default: Off)
■
Base Tone (default: Off)
■
All Tones
■
mm / inch : Set the units for the custom paper size to millimeters or inches.
■
Millimeter (mm) (default): The paper size is displayed in millimeters.
■
Inch (“) : The paper size is displayed in inches.