2
2-16
Performing Setup from the Control Panel
TCP/IP Setup options
TCP/IP Setup with Ethernet
To configure the DocuColor 40 CP for TCP/IP, choose TCP/IP Setup.
Choose Ethernet Setup and enter the appropriate settings. Choose each network
type you use (Ethernet and/or Token Ring) and enter the appropriate settings.
Token Ring Setup appears as an option only if you have enabled Token Ring in Port
Setup. If your network uses a gateway, enter the gateway address in Gateway Setup.
N
OTE
:
If TCP/IP is running on both an Ethernet and a Token Ring network, it is
assumed that the two networks are already routed to each other. The
DocuColor 40 CP does not function as a router.
Network Setup
Protocol Setup
TCP/IP Setup
Ethernet Setup
Enable TCP/IP for Ethernet
Yes/No [No]
Select
Yes
if you have a TCP/IP network connected to the DocuColor 40 CP over
Ethernet cabling.
If you use Token Ring, enabling TCP/IP for Token Ring is required for enabling the
WebTools.
N
OTE
:
If you are using TCP/IP for printing from Windows NT 4.0 workstations,
enabling TCP/IP here also enables you to use the DocuColor utilities from
Windows NT 4.0 workstations using TCP/IP protocols.
Exit Protocol Setup
AppleTalk Setup
TCP/IP Setup
IPX/SPX Setup
Protocol Setup
Exit TCP/IP Setup
Ethernet Setup
Token Ring Setup
Gateway Setup
TCP/IP Setup
