Xerox DocuColor 40 User Manual Download

Page: 150 / 163

A-2

Token Ring Network Option

STP

UTP

Token Ring connectors

Back view of the DocuColor 40 CP with the Token Ring option installed

Turn off the DocuColor 40 CP before connecting it to any network device.

OTE

Do not attach cable to both Token Ring connectors.

CONNECT

UTP (

UNSHIELDED

TWISTED

PAIR

)

CABLE

THE

OCU

OLOR

40 CP:

•

With the DocuColor 40 CP turned off, connect cable from the Token Ring MAU to the
DocuColor 40 CP Token Ring card.

Configure the NetWare, Windows NT, or UNIX server to print to the
DocuColor 40 CP (see the next two sections). Then proceed to page 2-2 for
DocuColor 40 CP Setup.

STP

UTP

Token Ring connectors

Summary of Contents for DocuColor 40




































































































































































Search results

Summary of Contents for DocuColor 40

Reviews:

Related manuals for DocuColor 40

Brands by name

Popular brands

Xerox DocuColor 40, User Manual

Search results

Summary of Contents for DocuColor 40

Reviews:

Related manuals for DocuColor 40

Brands by name

Popular brands