Xerox CopyCentre C20 Page 72 User Manual Download

Page: 72 / 215

Page 4-2

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide

r an

d Other

Med

Loading Paper

Preparing Paper for Loading

Before loading paper into the

Paper Trays

, fan the edges. This procedure separates any

sheets of paper that are stuck together and reduces the possibility of paper jams.

To avoid unnecessary paper jams and misfeeds do not remove paper from its packaging until

required.

Using the Paper Trays

Loading the Paper Trays

Using the instructions provided, load paper into the machine. Up to two

Paper Trays

are

available, depending on your machine configuration. The

Paper Trays

can hold a maximum

of 550 sheets of 80 g/m

(20 lb) plain paper.

To load paper, pull open the

Paper Tray

Push down on the pressure plate
until it locks into position.

Summary of Contents for CopyCentre C20
























































































































































































































Search results

Summary of Contents for CopyCentre C20

Reviews:

Related manuals for CopyCentre C20

Brands by name

Popular brands

Xerox CopyCentre C20, User Manual

Search results

Summary of Contents for CopyCentre C20

Reviews:

Related manuals for CopyCentre C20

Brands by name

Popular brands